How to Soften Aquarium Water Naturally

Do you know some fish are fond of hard water, while others prefer soft water? However, sometimes soft water may become hard as the aquarium’s living conditions change. Accordingly, this article will walk you through some methods about how to soften water for aquariums naturally. So let’s get started right away.

What is soft water in aquariums

GH & KH

To begin with, let’s learn something about water hardness, which includes GH and KH. GH, also called general hardness, means the levels of calcium and magnesium in the water. General hardness is the reason for limescale forming on the aquarium lids and glass. On the other side, KH, also named carbonate hardness, refers to the levels of carbonate and bicarbonate in the water.

Though GH (general hardness) and KH (carbonate hardness) measure the water hardness, they are different exactly. GH does not influence the pH level, while KH directly affects the pH level. Generally, the higher the KH, the higher the pH level. For instance, adding Indian almond leaves or catappa leaves would decrease the pH level and KH in the water, then the water turns more acidic, but the GH is unchanged. Therefore, you should know which one you need to reduce – GH or KH.

Aside from that, there is more you need to learn about water hardness.

Aquarium water hardness – Soft water & Hard water

Additionally, how to tell if the aquarium water is hard or soft? Specifically, hard water comes with a high pH level because of its high mineral content. While the pH level of soft water is usually low, due to the low mineral content. In general, hard water tends to be more alkaline, and soft water is more acidic. Next, we will list some general values of hard and soft water.

• Hard water: more than 12 dGH/more than 210 ppm
• Moderately hard water (8-12°GH/140-210 ppm)
• Soft water: 4-8 dGH/70-140 ppm
• Very soft water: 0-4 dGH /0-70 ppm

However, these values are just references. They are not definitive answers. Generally, the 4-8 dGH or 70-140 ppm is suitable for most freshwater fish tanks, the 3-15 dGH is ideal for most planted aquariums, while the 4-12 dKH is good for most freshwater planted aquariums.

Next, we will list some fish demanding soft water.

How to soften aquarium water

In this segment, we will cover methods of how to soften water in aquariums.

Change water

1. Rainwater

(1)Roles of Rainwater

• Lower GH and KH
• Lower pH level

(2)How To Do

Mix the rainwater with tap water. Then refill the aquarium.

(3)Pros and Cons of Rainwater

Pros:

• Lower cost or even free
• Mixing it with tap water to lower GH and KH
• Lower the pH level under 7.0

Cons:

• Not ideal for regions of rainwater deficiency
• Consume time and energy to collect and store rainwater

2. Distilled water

(1)Roles of Distilled Water

• Lower GH and KH
• Lower pH level

(2)How To Do

Mix the distilled water with tap water, then refill the aquariums.

(3)Pros and Cons of Distilled Water

Pros:

• Available in stores
• Distilled water is purified to neutral with a pH level of 7.0

Cons:

• Higher cost

3. RO/DI water (Reverse Osmosis water/Deionization water)

(1)Roles of RO/DI Water

• Lower GH and KH
• Lower pH level

(2)How To Do

Mix the RO/DI water with tap water, then refill the aquarium.

(3)Pros and Cons of RO/DI Water

Pros:

• The degrees of GH and KH for RO or DI water is zero
• The pH level of RO or DI water is about 7.0
• No need to store the water

Cons:

• The high cost (expensive RO/DI system)
• Waste of water
• For large aquariums, it consumes time to purify water

Driftwood

(1)Roles of Driftwood

• Lower KH
• Lower pH level

(2)How To Do

Add driftwood to the aquarium, just like aquarium decorations.

(3)Pros and Cons of Driftwood

Pros:

• Tannin helps to enhance the immune system of fish, which is beneficial against fungal infection
• Available in pet stores

Cons:

• Watercolor turns brown: brown tannin leached from the driftwood will make the watercolor brown, but it is not damaging to fish
• Risk of introducing parasites to your tank

Indian Almond Leaves

(1)Roles of Indian Almond Leaves

• Lower KH
• Lower pH level

(2)How To Do

Rinse, soak, or boil the Indian almond leaves before adding them to aquariums. Commonly, one leaf or two leaves for every 10 gallons of water.

(3)Pros and Cons of Indian Almond Leaves

Pros:

• Ideal for shrimp aquariums, like Caridina shrimp (e.g. Crystal shrimp, Tiger shrimp, and bee shrimp)
• Tannin helps to enhance the immune system of aquatic pets, which is beneficial against fungal infection
• A food source for shrimps
• Do not affect GH

Cons:

• Watercolor turns brown: brown tannin leached from the leaves will make the watercolor brown, but it is not damaging to the pets
• Not an excellent option for tanks larger than 20 gallon

Peat

(1)Roles of Peat

• Lower KH
• Lower pH level

(2)How To Do

Place the peat in a mesh bag, and then put it into the aquarium filter.

(3)Pros and Cons of Peat

Pros:

• A great alternative for large tanks
• Tannin helps to enhance the immune system of fish, which is beneficial against fungal infection
• Do not affect GH

Cons:

• Watercolor turns brown: brown tannin leached from peat will make the watercolor brown

Relevant topic

In short, just test the aquarium water regularly and determine the real-time water condition. Then adjust the water parameters according to the tank size and status. By the way, you can go to Aquarium Water Sources – The Best Water for Aquarium to know more about aquarium water.

Related Products

Add to Wishlist

Sold out

hygger 7 in 1 Aquarium Test Strips

Rated 5.00 out of 5

Add to Wishlist

hygger Aquarium Small Internal Filter

Seamless design for 0.5-20Gal

Rated 5.00 out of 5

$12.99 – $15.99