Product Features
- Intelligent Temperature Control System
The hygger titanium tube heater is made of TA2 aerospace titanium alloy, and the heater tube is covered with Teflon. It is suitable for 10 to 80-gallon saltwater and freshwater fish tanks. It has a built-in intelligent IC chip, an accurate temperature control system and memory function, and an external controller that can display water temperature and set temperature.
- Heating Memory Function
The temperature accuracy of the heater is 1°F/°C and the setting range is 68°F to 90°F (20°C-32°C). The heater has a high IP68 waterproof rating and is also explosion-proof, corrosion-proof, and ozone-proof. In case of power failure, the heater will heat up when power is restored according to the last setting.
- Fast Heating, Safety, and Durability
The heating tube is made of explosion-proof quartz glass with durable and stable nichrome wire inside, which can fully convert electric energy into heat energy, save energy, and heat safely while heating quickly. The heating tube not only conducts heat to the surrounding environment quickly and stably but also is safer for the creatures in the aquarium.
- Temperature Calibration Function
When the internal temperature differs from the external thermometer, the titanium heater can be calibrated by pressing the “+” and “-” keys for 5 seconds simultaneously. This calibration feature helps you set the temperature more accurately and makes the heater work better.
- Overheating Protection
When the water temperature exceeds 95℉-97℉, the titanium tube heater automatically stops heating, and the controller will flash the E2 fault code. The heater will start working automatically when the water temperature drops to 90℉.
- Constant Temperature
When the water temperature is 1-2℉ lower than the set temperature, the red indicator will light up and start heating automatically. The hygger 085 titanium heater will always maintain a comfortable temperature for your tank.
Instructions for Use
- Tips to use hygger titanium tube heater
1. Completely submerge the heater in water; do not bury it in sand or expose it to air.
2. The temperature sensor and heater must be completely immersed in water simultaneously to work together, and the distance between the two should not be too close.
3. Disconnect the power socket and wait 15 minutes before changing the water or removing the heater.
4. When the heater is exposed to air, the power supply must be turned off, and the dry burning time should not be too long.
5. When using titanium heaters, ensure enough water circulation in the tank.
6. Since the external temperature controller is not waterproof, it must be kept from water.
- How to set the hygger 085 aquarium heater
1. Press the ‘Set’ button and then press the “+” or “-” button to the desired temperature, the temp + or – 1℃/℉ with each time press. Once the setting is done, the screen will display the current water temperature.
2. Press and hold the ‘Set’ button for 5 seconds to switch the temperature unit of ℉/℃ easily.
3. Press and hold “+” and “-” simultaneously for 5 seconds to perform temperature calibration. The temperature calibration range is 士5℉/℃.
4.The voltage is 110-120V, 60Hz, the power cord is 4.82+1.31 feet.
- Suggestions
1. We recommend installing the heater vertically or horizontally underwater near the water intake. But vertical installation doesn’t take up much space.
2. Use a wave maker or circulating pump in the fish tank. Good water circulation helps to distribute the heat generated by the heater evenly.
3. Clean the heating plate regularly.
These are absolutely wonderful for my tanks. I actually bought another one after I bought the first for my other larger tank and it does very well… it’s has an automatic shutoff at the temperature you set it to; and it uses very little space.