hygger Aquarium Dosing Pump

Smart, Accuracy & Automatic

The hygger aquarium dosing pump is a modern product that can automatically time and quantitatively add nutrient solutions according to demand. It can meet the various needs of different aquarists.

Each pump can be programmed individually, and each channel can provide liquid volume adjustment between 1 and 9999 ml per day and can be used immediately after calibration with a 100-graduated cylinder. It has an LCD and key buttons, which makes it easy to operate.

Safe to Use

The dosing pump works with low voltage. Only one wire is needed. You can connect an additional pump and use the other 4 pump channels. The coral box dosing pump head is removable for replacement. It is made of POM material with good wear resistance. With the upgraded touchscreen controller, you can set it up with just a touch of the screen. The internal instrumentation is precise, ensuring the accuracy of the titration.

You can choose any time to start and capacity within 24 hours a day, and can also individually select the number of times each channel works in a day. The working interval can be adjusted between 1–30 days. If the interval is set to 0, it means it will work automatically every day.

Helpful troubleshooter

A peristaltic dosing pump can help you solve many kinds of troubles, such as not being at home on holidays, the fish tank being too high, the operation being inconvenient, and the memory confusion caused by adding various liquids many times.

Good partner for growing corals

Programmable auto titration pump for marine coral reef tanks, 4 channel dosing heads with 8 titration long hoses. It helps to simulate the marine environment and maintain the ecological balance for a complete coral marine system. It is very suitable for adding CA / MG / AB water or other liquids to affect the growth and color of corals, helping to create a beautiful and unique saltwater coral tank.

Flexible selection

You can choose any time to start and capacity within 24 hours a day. The working interval can be adjusted between 1–30 days. If the interval is set to 0, it means it will work automatically every day. You can individually select the number of times each channel works in a day.

Wild application

It regularly adds a variety of nutrient solutions and marine trace elements to meet a variety of needs. It is also used for plant breeding and other situations where a variety of liquids are added.

Directions for Use

Dosing Pump Tubing

For the accuracy of calibration, fill the tube before calibration and remove as many air bubbles as possible (the connection between the tube and the pump is most likely to have air bubbles).

Auto-control setting

On the main interface, Press “ENT” to enter the settings menu. Press the “↑”  or “↓” button, select the “Set Program” when “<”  point to set program press ENT to Single pump setup (Select Pump _ set:)

Pump choose press  “-” to select the pump, one dosing pump, choose 1, 2, 3, 4 pumps connecting a submachine, and choose 5,6,7,8 pumps. Choose the setting pump, press “ENT” to set the dosing times

Interval Day: You can choose 0–30 days as an interval time. 0 means no Interval and the pump will dosing every day. It means one day and the pump will be dosing the day after tomorrow. The biggest is 30 days. Press “tI” to plus or minus the days. Press “ENT” to enter the interface setting first dosing volume

Dosing Volume: The dosing volume per time. Press “+” “-” to set the volume, and press “t” “I” to plus or minus, Max. 9999ml Press “ENT” to enter the first dosing time setting. Fig. “1” means lost time.

Dosing time: Set the pump work time as per request, let the pump work at a fixed time Shift “-” to choose the hour minute. Press “t” “to” plus or minus. Press “ENT” to enter the next dosing volume setting each time volume and time one by one Press “ENT” back to the chosen face, and choose another pump setting. Press “ESC” to back the pump choices. When finished with all pumps, press “ESC” back to the main interface

Recommended:

1. You can put the aquarium dosing pump on the bottom of the fish tank. If the liquid dosing pump is below the water level, you need to add a check valve.
2. Put the dosing pump beside the fish tank. If the pump reef is below the water level, you need to add a check valve.
3. You can put the pump above the fish tank.

NOT Recommended:
It is not recommended to put the auto-dosing pump near the water surface, which may cause corrosion of the pump.

Other Tips

1. The titration pump must be calibrated before use.
2. The water quality should be tested at least every 2 weeks when using a titration pump.
3. The outlet for titrating KH should be regularly cleaned for crystallization.
4. Do not place the titration pump in a damp environment
5. Please keep the machine on a horizontal plane during use. This will increase precision.