hygger Aquarium Wave Maker

Ultra-Quiet Wave

Hygger 010 wave maker circulates water ultra-quietly with a power head of 1050GPH/2100GPH for 20-130 gallon aquariums.

360°Rotation

The wave maker can be rotated 360 degrees after being installed in the aquarium. It can fully control the water flow direction and make the water temperature equalize.

Strong Magnetic Base

Two strong magnetic brackets make the adsorption more stable to prevent it from falling off. The stable magnetic base reduces noise to circulate water quietly and naturally.

Increase Water Circulation

It can simulate natural currents, such as rivers and oceans. It is designed to blow away fish feces and food debris, creating a healthy circulation of water for fish tanks.

Application

Safe to use in freshwater and saltwater fish tanks and coral aquariums. The maker creates water movement for fish and improves water circulation, it can also increase the oxygen level of tank water, which is beneficial to the health and growth of aquatic pets.

Easy to install

Easy to install the wave maker with magnetic holders in any position inside the aquarium.
The different installations have different effects on the aquarium:
Bottom Installation can clean the residue of the fish tank, including uneaten food and fish excrement.
Install it in the middle of the aquarium wall to exercise and shape your fish’s body.
Install an aquarium upper to circulate the whole tank water.

Directions for Use

Way to separate the magnetic base:
Hold the protrusions on both sides of the base, rotate the base to a certain angle in opposite directions with both hands and forcefully separate the base.
When installing the aquarium wave maker, please slide the base from the side.
Note: Please slowly put the other half of the magnetic base together with the base inside the aquarium from the side.

Use Tips:

1. Must be 100% submerge the wave maker head into the water
2. Please do not expose the wave pump to the surface of the water.
3. The suction cups prevent pinching before installation, remove the suction cups before you install the 010 wave maker in the tank.