Today I am going to introduce two high-tech hygger products to you. You can throw both your glass heater and poor-quality light into the garbage.
Content Table
Hygger fast-heating heater
First, this Hygger fast-heating heater has a digital control with easy readout and is very accurate within 0.1 degrees.
Hygger’s fast-heating heater is a smart heater for several reasons. As it starts to approach its targeted temperature within minutes of starting temp; it slows down within the last 2 degrees, so it’s accurate not to overheat the water for a close-to-perfect reading. I love how the heater shows me when it’s heating or when it’s idle.
More often than not, people tend to forget to turn off the heater; or the water evaporates faster than they thought, then the heater is going to be exposed to the air. Once the heater is out of water, it will automatically turn itself off; when it is submerged, it will be working normally again. If it is over 93.5°, it will indicate false code EE; when it is over 97°, the heater will start heating until it falls back to 93°.
The fluctuation in temps was stressing your fish out! Hygger fast-heating heater has much better control over consistent water temps, to the point your fish will be healthier and your electric bill will be less. The low water error function is a very nice feature. It can outlive the other heaters that you have used in the past.
Either way, it’s a good quality heater, and I’m sure you are going to be happy with this purchase.
Anthurium light with the display screen
Now I am going to introduce to you the first anthurium light with display screen
If you are a fan of programming things, this is the light you should be choosing! However, if you do not want to program the light, all you need to do is to set the local time and let the programmable LED light run its automatically 24-hour cycle in which the modes of sunrise, daylight, sunset, and night are all included!
The light will automatically on at 630 am and turn itself off at 1130 pm. There is a very sweet function of ramp-up and ramp-down meaning the light will be on and off in a 15-minute duration. This is also going to make sure that your skittish fish will not be scared due to the sudden change of lighting.
During the daytime, you will enjoy the full spectrum of lighting. At night, you could choose from any of those 6 colors: dark blue, green, purple, cyan, yellow, and red.
You could also change the brightness of the light from 10% to 100% in default mode. Brightness is one of the most important factors that you need to take into consideration when comes to buying LED lights. When you first move the aquarium plants to a new fish tank, they are so scared that they tend not to grow. In this case, you could change the brightness to 20% and wait until the plants settle down to make the light brighter.
For DIY mode, you are going to have 8 time slots to choose from. You could decide how long does each of the 8 time slots last. You could make the period last for 2 hours, 8 hours or 12 hours, etc. During those 12 hours, you could change the brightness to 0, yes, you could change the brightness to 0 in DIY mode to let your fish and plant have a good night’s sleep!
Please click on the picture to find out more about the products!
Please leave your comment and let us know what other user-friendly packages you would want us to introduce.
Related Products
Leave a comment