Unique 3D background design
The 8 gallon fish tank 3D background makes the whole aquarium look like a dream world underwater. It is a great resting place, play spot, and shelter for little fish. You can plant some green grass in the Rocky Mountains.
3-mode LED Light
3 light modes are available: White LEDs, Blue+white+red LEDs, and Red+ blue LEDs.
The voltage/power of the aquarium LED light is DC 12 V / 18 W. With extendable brackets, the length can be adjusted from 0 to 19 inches. Using the external digital controller, you can set the lighting time to 3, 6, or 12 hours to adjust the light brightness from 100% to 10%, with 5 levels of brightness in total.
Durable power filter
The aquarium power filter is fit for tanks sized from 2 to 8 gallons. It’s a super quiet and durable filter that can be used for low water levels. The upper part is the 2-stage filtration system. The bottom part is the water pumping system to pump the water upward.
Please NOTE, that this filter may be too strong for small fish that are smaller than 2 inches. It may suck small fish. So if there are small fish in the tank, please don’t run the filter or don’t run it all the time.
New-view curved tank
This glass 8-gallon betta fish tank has a unique convex arc curve shape, which can widen your view of the aquarium and hold more capacity water in the tank. The total tank volume is 8 gallons. It can hold 6 gallons of water because the tank has an undetachable 3D background decor. When it holds full water, the whole tank weighs about 68 pounds.
Multi-protection packing
We use 3 layers of packing to pack the aquarium kit. And with the light lifting label, the innermost layer is a super sturdy poly foam with an excellent cushion. We have done the shipping test by sending 3 of the packs to 3 different distance places and found the glass tanks are still in good condition when received. So don’t worry that the tank will be broken during the shipping. If you find the tank is broken when opening the package, please take a photo and send it to us.
Directions for Use
Follow the tank set up steps:
Step 1: Clean the tank and filter with clean water and towels. Do not use chemicals that are not intended for aquarium use.
Step 2: Place the tank on a level, sturdy, completely flat surface in your desired location. Keep away from direct sunlight and air vents.
Step 3: Rinse gravel and decor, then decorate your aquarium before adding water to avoid over-filling.
Step 4: Fill the tank with room temperature tap water treated with aquarium conditioner to remove chlorine.
Step 5: Rinse the power filter cartridge and assemble it, then fit the power filter into the preformed hole with the suction cups.
Step 6: Position the extended LED light on the top of the tank properly.
Step 7: Plug in the LED light and power filter, and turn on the power.
Tips for a successful aquarium:
1. Keep the LED light on for a maximum of 8 hours per day.
2. Change 25% of the water once per week.
3. Keep the water level properly to keep the power filter working.
After ordering I was worried there wouldn’t be enough room with the background. I was pleasantly surprised when the tank arrived. There’s way more room in the tank that I thought there would be. The tank is AWSOME, the filter is quite and the waterfall feature is great especiallywoth the flow control. The light is great also with the ability to adjusting the light and the timer it’s just what I needed. All I did was add a heater under the rock shelf so it was out of view and now it’s an amazing little center peice.
Great looking tank with a dynamic shape. Nice package with 3d background and integrated filtration.