hygger High Flow Air Pump

Excellent Performance

Built-in pure copper motor, hygger high flow air pump aerator has superpower, high efficiency, low energy consumption, and a long service life. Come with a multi-outlet diverter valve, so you can connect tubing and air stone, so the pump can support the oxygen supply of various fish tanks at the same time.

Efficient & Energy Saving

hygger high-flow air pump motor is made of pure copper coil, which significantly reduces energy consumption and optimizes efficiency without sacrificing performance.

Improve Heat Dissipation Performance

The expansion of the shell surface and the design of the filtered air hole effectively enhance heat dissipation and extend the service life of the pond oxygenator air pump. A little heating up is normal when the pump is working, you can put the high-flow air pump at a well-ventilated location.

Ultra Quiet

From the inside to the outside, the hygger big air pump is designed for multi-layer noise reduction, sound absorption, and shockproof to achieve low noise operation. The built-in motor magnetic drive design ensures less vibration and quieter operation. The designed thickened aluminum alloy shell, 4 silicone feet and rubber buffers, multi-layer noise reduction, double sound absorption, and shock protection to achieve low noise operation.

Waterproof

The high-flow air pump can be used outdoors on light rainy days, but it can’t be exposed to moderate or heavy rain for a long time to prevent the air pump from being damaged.

Multiple Applications

The big air pump can be used as a fish oxygen air pump for ponds, restaurant seafood tanks and aquariums, fish farms, etc., used as a hydroponic air pump, which aerates nutrients to stimulate plant root growth. Used as a septic air pump, boosts waste decomposition by adding oxygen to encourage aerobic bacteria to decompose organic matter.

Directions for Use

Use Tips:

hygger high flow air pump is super powerful in air volume and air pressure:

18Watt: 475GPH(30L/Min), 0.030MPa.
25Watt: 800GPH(50L/Min), 0.030MPa.
40Watt: 1270GPH(80L/Min), 0.030MPa.
105Watt: 2550GPH(160L/Min), 0.042MPa.

Note: We recommend that put the high-flow air pump at a well-ventilated location. A cooling fan will help extend the life of the pump.

Attention:

1. Please read and follow the user manual carefully before using it.
2. Please install the hygger high-flow air pump with check valves or place the air pump 25cm (10 inches) higher than the water surface to avoid water backflow and potential damage to the pump.
3. If your air pump stops working because of the breakdown of the diaphragm, you only need to replace the diaphragm to make the machine work normally. Please tell us and we will help you solve this problem.
4. If you do not need to use all outlets of the diverter at the same time, please close the extra outlets to ensure that the outlets used are supplying oxygen normally.
5. Place the pump on a flat surface and put a towel or rubber mat under it to reduce the noise further.
6. Please keep the pond aerator pump away from flammable items to avoid accidents.
7. Please unplug the power and contact the hygger if the big air pump is making abnormal sounds, overheating, or has no air output.
8. Please note that airflow loss is usually caused by a clogged air stone, which is the result of algae floating debris, and mineral deposits accumulated in the pores. If you notice a diminished airflow, try blowing through the air-stone by yourself. If it is difficult, replace the airstone.
9. Please unplug the power before maintenance.
10. Please notice that the operating temperature range for the big pump is between 32℉-100℉(0°C-38°C).

Specifications